（86）15278284060
Xenia@winpower.con.cn
Product overview
Product performance description
T31526 display board is a display device made by Winpower Technology Co., Ltd. for supporting ultrasonic oxygen sensor data display. It converts the received ultrasonic oxygen sensor data through the serial port and displays it, and is supplemented by an LED indicator to indicate the ultrasonic oxygen sensor data to send status.
Interface definition and power supply description
- Adapter Power Supply: Connect J1 to the matching 12V adapter for power supply, and connect J3 or J4 to any oxygen sensor.
- J3 or J4 Power Supply: For the convenience of customers to compare machine display,the display board also supports customers’ motherboards providing power to the display board
through J3 or J4.
Connect the sensor to J3 or J4, but pay attention to the signal definition and do not connect incorrectly. This connection method does not support the single-transmit-single-receive mode of
sensors, nor does it support custom protocol products. The motherboard can only passively receive data.
Note: The display board supports 5V power supply.
Operating instructions
Press the key for more than 1 second to adjust the display mode, and press the key for less than 0.5 seconds to turn on/off the backlight with special functions. After the mode is adjusted, it
is automatically stored. After the system is powered on again, the display mode is the last adjusted mode.
Display description
1.Conventional display mode: -00-.
It’s suitable for all sensors without temperature and humidity pressure compensation (3F, 3FL, 3L, 3ML, 3MFL). Note: Custom versions are not available.
2.3RL sensor dedicated display mode: -01-
3.3FRL sensor dedicated display mode: -02-.
Reviews
There are no reviews yet.